PPG INDUSTRIES, INC. -- CONCEPT ACRYLIC URETHANE  -- 9999-00B160019
<pre>=====================  Product Identification  =====================

Product ID:CONCEPT ACRYLIC URETHANE
MSDS Date:08/24/1990
FSC:9999
NIIN:00B160019
=== Responsible Party ===
Company Name:PPG INDUSTRIES, INC.
Address:4325 ROSANNA DRIVE
Box:P.O. 9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Info Phone Num:(412) 492-5555
Emergency Phone Num:(304) 843-1300
CAGE:DO894
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC.
Address:260 KAPPA DRIVE
Box:City:PITTSBURG
State:PA
ZIP:15238
Country:US
Phone:412963-5822
CAGE:92022
Company Name:PPG INDUSTRIES, INC.
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Phone:412-592-5555
CAGE:DO894

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM DIOXIDE
CAS:13463-67-7
Fraction by Wt: 35%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:COPPER PHATHALO BLUE 15:1
CAS:147-14-8
Fraction by Wt: 10%
Other REC Limits:NONE SPECIFIED

Ingred Name:NICKEL AZO COMPOUND
CAS:51931-46-5
Fraction by Wt: 10%
Other REC Limits:NONE SPECIFIED

Ingred Name:BROMOCHLOROCOPPER PHTHALOCYANINE (PIG.GR36)
CAS:14302-13-7
Fraction by Wt: 10%
Other REC Limits:NONE SPECIFIED

Ingred Name:LEAD CHROMATE PIGMENT YELLOW 34  (CARCINOGENIC ACCORDING TO
    CRITERIA ESTABLISHED BY NTP AND IARC
CAS:1344-37-2
Fraction by Wt: 45%
Other REC Limits:NONE SPECIFIED

Ingred Name:NORMAL BUTYL ALCOHOL
CAS:71-36-3
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:LIGHT AROMATIC SOLVENT NAPHTHA
CAS:64742-95-6
Fraction by Wt: 10%
Other REC Limits:NONE SPECIFIED

Ingred Name:XYLENE
CAS:1330-20-7
Fraction by Wt: 30%
Other REC Limits:NONE SPECIFIED
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:2-BUTOXY ETHYL ACETATE
CAS:112-07-2
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED

Ingred Name:PROPYLENE GLYCOL MONOMETHYL ETHER ACETATE
CAS:108-65-6
Fraction by Wt: 20%
Other REC Limits:NONE SPECIFIED

Ingred Name:N-BUTYL ACETATE
CAS:123-86-4
Fraction by Wt: 20%
Other REC Limits:NONE SPECIFIED
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 50%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Health Hazards Acute and Chronic:ACUTE: NONE SPECIFIED BY MANUFACTURER.
    CHRONIC: PRODUCT CONTAINS TITANIUM DIOXIDE. ANIMALS INALING MASSIVE
    QUANTITIES TITANIUM DIOXIDE DUST IN A LONG-TERM STUDY DEVELOPED
    LUNG TUMORS. THERE IS NO CONC LUSIVE EVIDENCE OF THESE EFFECTS IN
    HUMANS. OVEREXPOSURE TO LEAD ADVERSELY EFFECTS BLOOD AND BLOOD
    FORMING TISSUES.
Effects of Overexposure:CONTAINS LEAD. LEAD POISONING IS CHARACTERIZED
    BY A METALLIC TASTE IN THE MOUTH. LOSS OF APPETITE, INDIGESTION,
    NAUSEA, VOMITING, CONSTIPATION, ABDOMINAL CRAMPS, DISTURBANCE OF
    REST AND SLEEP & WEAKNE SS. EYE WATERING, HEADACHES, NAUSEA,
    DIZZINESS & LOSS OF COORDINATION ARE INDICATIONS THAT SOLVENT
    LEVELS ARE TOO HIGH.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DO NOT INDUCE VOMITING. EYES: FLUSH EYES
    IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 30 MINUTES. SKIN:
    FLUSH IMMEDIATELY WITH PLENTY OF WATER FOLLOWED BY WASHING WITH
    SOAP AND WATER. INHA LATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
    RESPIRATION AND OTHER SUPPORTIVE MEASURES AS REQUIRED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:72.0F,22.2C
Lower Limits:1.2
Extinguishing Media:USE NPFA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
    CHEMICAL OR UNIVERSAL AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. SPRAY MAY BE
    USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP AND
    POSSIBLE AUTOIGNITION. USE SCBA.
Unusual Fire/Explosion Hazard:KEEP TIGHTLY CLOSED. ISOLATE FROM HEAT,
    SPARKS AND OPEN FLAMES. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED
    TO EXTREME HEAT. TOXIC GASES MAY FORM FROM HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
    EQUIPPED WITH PROPER RESPIRATORY AND SKIN & EYE PROTECTION SHOULD
    BE PERMITTED IN THE AREA. REMOVE ALL SOURCES OF IGNITION. CLEAN UP
    SPILLED MATERIAL WITH S AWDUST, VERMICULITE, OR OTHER
    ABSORBENTMATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
    CLASS 1B FLAMMABLE LIQUIDS.
Other Precautions:AVOID FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES.
    DO NOT APPLY ON TOYS OR OTHER CHILDRENS ARTICLES, FURNITURE OR
    INTERIOR SURFACES OF ANY DWELLING FACILITY WHICH MAY BE OCCUPIED OR
    USED BY CHILDRE N.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:VAPOR EXHAUST OR FRESH AIR ENTRY. NIOSH/MSHA
    APPROVED (TC-232C) PAINT SPRAY OR AIR SUPPLIED (TC-19C) RESPIRATORS
    MAY ALSO REDUCE EXPOSURE.
Ventilation:PROVIDE DILUTION OR LOCAL EXHAUST VENTILATION IN VOLUME AND
    PATTERN.
Protective Gloves:NITRILE OR NEOPRENE RUBBER, OR POLYVINYL
Eye Protection:WEAR CHEMICAL-TYPE SPLASH GOGGLES.
Other Protective Equipment:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Work Hygienic Practices:NORMAL PERSONAL HYGIENE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F5
Boiling Pt:B.P. Text:180F,82C
Vapor Pres:5.8MMHG
Evaporation Rate &amp; Reference:70
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
    SOLVENTS LISTED IN SECTION 2.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
    OF IGNITION
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS DECOMPOSITION
    PRODUCTS. NO WELDING, BRAZING, OR FLAME-CUTTING ON SURFACES COATED
    WITH PRODUCT.
Conditions to Avoid Polymerization:AVOID CONTACT WITH STRONG ALKALIES,
    STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
    REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
    THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.